field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description:
We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements.
Key Responsibilities:
<ul>
<li>
Define and develop RF system architectures for radar and advanced sensing applications.
</li>
<li>
Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance.
</li>
<li>
Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics.
</li>
<li>
Conduct trade studies and system optimization to balance performance, cost, and schedule.
</li>
<li>
Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems.
</li>
<li>
Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment.
</li>
<li>
Perform root cause analysis of system performance issues and recommend design changes.
</li>
<li>
Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans.
</li>
<li>
Provide technical mentorship to junior and mid-level RF engineers.
</li>
</ul>
Compensation Range: $112,900 - $146,800
#CJ
The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.
Skills and Experience:
Required Qualifications:
<ul>
<li>
Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred).
</li>
<li>
10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms.
</li>
<li>
Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity.
</li>
<li>
Demonstrated experience deriving and validating system-level RF budgets.
</li>
<li>
Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar.
</li>
<li>
Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations.
</li>
<li>
Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing.
</li>
<li>
Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters).
</li>
<li>
US Citizenship with the ability to obtain and maintain a security clearance.
</li>
</ul>
Preferred Skills:
<ul>
<li>
Experience in phased-array architectures and beamforming.
</li>
<li>
Knowledge of military/aerospace standards and environmental testing.
</li>
<li>
Strong communication skills for customer and internal design reviews.
</li>
</ul>
Citizenship Requirements:
Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
Drug-Free Workplaces: 
Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.
Benefits:
Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. 
Highlights include:
<ul>
<li>
Medical, vision, and dental insurance for employees and dependents
</li>
<li>
Generous paid time off, including 8 designated holidays
</li>
<li>
401(k) with employer contributions
</li>
<li>
Tuition assistance and student loan assistance
</li>
<li>
Wellness and employee assistance resources
</li>
<li>
Employee stock purchase opportunities
</li>
<li>
Short-term and long-term disability coverage
</li>
</ul>
About Us:
Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.
Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Senior Staff RF Electrical Engineer

<h3>Job Description</h3>
About Maintenance at Amazon Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance &amp; Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Robotics and Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us on our journey! About the Role As a Mechatronics &amp; Robotics Technician, you will use your skills to support the Operations Maintenance team in repairing and maintaining material handling equipment and pneumatic systems throughout the building. You will have the opportunity to install, maintain, and repair automated packaging and distribution equipment. In addition to developing your skills, you will mentor junior technicians to grow in their roles. What Do We Offer? Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there is more: We provide lightweight fire-resistant daily wear and composite toe safety shoes for your safety! Here is what you can expect with the Reliability &amp; Maintenance Engineering (RME) selection process for Mechatronics &amp; Robotics Technicians: (Timeframe: Approximately 30-days) Step 1: Congratulations! You successfully submitted your application! Step 2: Amazon Recruiting will review your application and invite the most qualified candidate to complete a pre-employment assessment. Step 3: If you meet the role qualifications, you will receive an invitation from Amazon Recruiting (<a href="mailto:do-not-reply@criteriacorp.com" target="_blank">do-not-reply@criteriacorp.com</a>) to begin your Criteria assessment. You have 5 days to complete. Step 4: Once you successfully meet the pre-employment assessment requirements, you will be invited to complete a video interview. Your video interview invitation will be from HireVue (<a href="mailto:interviews@hirevue.com" target="_blank">interviews@hirevue.com</a>) and you will have 7 days to record your interview. Step 5: Your video interview will be reviewed by the Amazon Hiring Team and you will be notified of next steps via email within 5 business days. Please note that while we strive to accommodate employees' preferences for shift assignments, due to operational requirements and scheduling constraints, we cannot guarantee a specific shift assignment. Key job responsibilities Key job responsibilities include, but are not limited to: - Promote a safe working environment by following all safety procedures - Complete preventative maintenance routines with proper documentation - Troubleshoot electrical and mechanical problems related to all Material Handling Equipment (MHE) which includes belts, motors, photo-eyes, relays, and more - Maintain a positive working relationship across all of the Amazon Operations facility - Track and store department inventory - Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodation - Climb ladders and gangways safely and without limitation - Regular bending, lifting, stretching, and reaching both below the waist and above the head - Engage in full manual dexterity in both hands and wrists 
BASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience - 2+ years of conducting predictive and preventative maintenance procedures experience - 2+ years of repairing material handling equipment (MHE), automated conveyor systems, or related mechanical/controls equipment experience - 2+ years of reading blueprints and electrical schematics experience - 2+ years of demonstrating safety standards experience - 2+ years of troubleshooting and diagnostics of material handling equipment (MHE) experience - High school or equivalent diploma - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays PREFERRED QUALIFICATIONS- Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field - 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field - Able to troubleshoot basic input and output function of building operations - Continuous improvement mindset - Willingness to learn and grow within Amazon RME - 2+ years of experience working with Programmable Logic Controller (PLC) based controls systems - 2+ years of knowledge with electrical and electronic principles - Experience with robotic operation and maintenance Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit <a href="https://amazon.jobs/content/en/how-we-hire/accommodations" target="_blank">https://amazon.jobs/content/en/how-we-hire/accommodations</a> for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $56,680/year in our lowest geographic market up to $76,024/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit <a href="https://www.aboutamazon.com/workplace/employee-benefits" target="_blank">https://www.aboutamazon.com/workplace/employee-benefits</a>. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Mechatronics & Robotics Technician

<h3>Job Description</h3>
Responsibilities Howmet Fastening Systems (HFS) is seeking a CNC Operator I for the Fullerton, CA site. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. 
<ul>\n
<li>Performs precision operation and set-up on CNC Grinders Milling machines, and Lathes, and runs manual support equipment. </li>
\n
<li>Able to resolve tooling manufacturing issues causing quality errors and slowdowns. </li>
\n
<li>Able to use complex fixtures for work holding on all machines. </li>
\n
<li>Must be able to teach and train others on numerous CNC and conventional machines. </li>
\n
<li> Able to complete one off jobs to exacting tolerances without direct supervision. </li>
\n
<li>Maintains a clean and orderly workplace in accordance with 5S standards </li>
\n
<li>Active involvement in Autonomous Maintenance program. Perform Preventative Maintenance per daily schedule </li>
\n
<li>Responsible for producing and maintaining high level quality parts </li>
\n
<li>Complete a first piece verification form per part number </li>
\n
<li>Perform Lock/Out Tag/Out (LOTO) </li>
\n
<li>Check all work with appropriate measuring tools, make offsets and edits as required Assist with training and development of entry level operators </li>
\n
<li>Active involvement in continuous improvement initiatives </li>
\n</ul>
\n Qualifications Basic Qualifications: 
<ul>\n
<li>Able to read and interpret documents as well as blueprints, and micrometers, to work from process drawings and sketches, and perform SPC </li>
\n
<li>Operate CNC grinders, mills, and lathes , can set-up difficult surface and cylindrical fixtures on machines. </li>
\n
<li>Excellent troubleshooting skills, and good communication skills </li>
\n
<li>Willing to cross train and/or assist other departments to meet facility goals </li>
\n
<li>Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required </li>
\n
<li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee </li>
\n</ul>
\n Physical Demands: 
<ul>\n
<li>Must be able to lift/move 30 lbs. (may not exceed per EHS policies) </li>
\n
<li>Must be able to stand for long periods of time </li>
\n</ul>
\n Preferrred Qualifications: 
<ul>\n
<li>High School Diploma or GED equivalent</li>
\n
<li>Three to 5 years' experience in CNC machining Fastener aerospace experience </li>
\n
<li>Mastercam programming experience</li>
\n</ul>
\n Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $17.64 to $29.46 per hour. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email&nbsp;protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

CNC Operator - Second Shift

<h3>Job Description</h3>
As an R&amp;D Process Engineering Technician, you operate equipment to develop and test plastic containers &amp; related tooling. Our R&amp;D Center in Jackson Center, OH leads product development of containers for top consumer brands. In this role, you will contribute to Plastipak’s high quality standards ensuring equipment is working efficiently, monitoring production processes and making adjustments or troubleshooting as needed.
We Offer 
<ul>
<li>Career Development: Participate in the development of innovative and market-leading plastic containers. Gain experience in an R&amp;D setting while growing your mechanical skillsets!</li>
<li>Stability &amp; Growth: We follow a strong promote-from-within business practice and offer a stable job through current market uncertainty!</li>
<li>Comfort:&nbsp; Our food-grade facility is exceptionally clean &amp; climate-controlled!</li>
<li>Consistent Schedule: Monday – Friday from 7:30am - 4:00pm</li>
</ul>
You Will
<ul>
<li>Perform &amp; monitor necessary setting adjustments such as machine programming, heat controls, cooling water temperatures, pressures and functioning of extruder and hydraulic pumping units.</li>
<li>Perform quality control checks and help maintain customer requirements according to specification. Make adjustments to correct and/or eliminate defects.</li>
<li>Perform mold changes and set ups as required within scheduled mold change timeframes utilizing in-process and setup sheets.</li>
<li>Coordinate mold set-up activities with production schedules to minimize downtime and maximize production efficiencies.</li>
<li>Troubleshoot mold problems and mold process issues, develop root cause and provide a quick permanent corrective action.</li>
<li>Perform preventative maintenance on machines and auxiliary equipment as assigned.</li>
<li>Join with your team to identify continuous improvement opportunities focused on safety, reliability, quality &amp; scrap reduction.</li>
</ul>
You Have
<ul>
<li>High School Diploma, GED or equivalent with 2+ years working experience; Associates in Mechanical Technology or equivalent preferred.</li>
<li>Proficient mechanical, electrical or other technical/machine operation experience</li>
<li>Working knowledge of extrusion or blow molding equipment is preferred</li>
<li>Ability to work OT when needed</li>
</ul>
As a Plastipak Associate, you receive a benefits package offering the following:
<ul>
<li>Wellness Programs</li>
<li>Health Insurance Coverage, including Medical, Dental &amp; Vision</li>
<li>EAP, Employee Assistance Program</li>
<li>Life Insurance</li>
<li>Accidental Death &amp; Dismemberment Insurance</li>
<li>Disability Insurance:&nbsp; Short-Term &amp; Long-Term</li>
<li>Accidental Insurance</li>
<li>Critical Illness Insurance</li>
<li>Hospital Indemnity Insurance</li>
<li>401(k) Plan, with Company Matching Contribution &amp; Profit Sharing feature</li>
<li>Paid Time Off&nbsp;&nbsp;&nbsp; - 80 hours within 1st year &amp; subsequent increases</li>
<li>Paid Company Holidays</li>
<li>Dependent Care Flexible Spending Account</li>
<li>Caregiving via Care.com</li>
<li>Pet Insurance</li>
<li>Tuition Assistance Program</li>
<li>Sons and Daughters Scholarship Program</li>
<li>Travel Assistance</li>
<li>Employee Discount Programs</li>
</ul>
*Some benefits are subject to eligibility requirements
Plastipak is an Equal Opportunity Employer
In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.

R&D Process Engineering Technician

<h3>Job Description</h3>
Job Description
Lou-Rich is seeking a skilled and detail-oriented Assembler to join our team. As an Assembler, you will play a crucial role in our manufacturing process by accurately and efficiently assembling components to create finished products. You will be responsible for ensuring that the highest quality standards are met and that all products are assembled according to specifications. Your precision and attention to detail will contribute to the overall success and customer satisfaction of our organization.
 
About Innovance, Inc.
Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committed to making our OEM customers’ products better.
 
About Lou-Rich
Lou-Rich is a fully integrated contract manufacturer specializing in complex projects. We provide precision machining, metal fabrication, assembly, and sourcing solutions to a variety of industries, including some of North America’s largest OEMs. Companies of all sizes from Fortune 500 companies to small, fast-growing operations trust Lou-Rich with their most vital and complex manufacturing projects.
Position Description:
This person will engage in the assembling of parts or assemblies into units by interpreting specifications, blueprints, and job orders. This person will also engage in foaming and tend to machine that sprays resins, and foaming materials. This person will also work on duties as assigned by the supervisor or lead person.&nbsp;
Essential Functions:
<ul>
<li>Individuals will work near moving mechanical parts of machinery and electrically activated devices.&nbsp;</li>
<li>Entry level mechanical level aptitude desired, experience working in manufacturing area is a plus</li>
<li>Must be able to work responsibly with limited supervision</li>
<li>Participate in continuous improvement activities that result in reducing variation and waste in the manufacturing process</li>
<li>Lift and position assemblies. Operate overhead hoist/crane to assist with the lifting and control of moving/positioning of assembly.</li>
<li>Maintain a clean, safe, and orderly work area.</li>
<li>Set-up and performs Assembly Department operations with minimum supervision.</li>
<li>Familiar with mechanical and electromechanical components.</li>
<li>Thorough understanding of part prints (tolerances, symbols, etc.).</li>
<li>Perform checks for quality of parts and make adjustments as required.</li>
<li>Perform other duties as assigned.</li>
</ul>
Other Duties:
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice&nbsp;
 
<ul>
<li>The Assembler is required to be on their feet using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, stoop, kneel or crouch.</li>
<li>The Assembler must be able to work in repetitive motion with hands, wrist, shoulders, etc.&nbsp;</li>
<li>The Assembler must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.&nbsp;</li>
<li>Entry level or 1-2 years of assembly experience&nbsp;</li>
<li>Knowledge of ISO</li>
<li>Familiar with mechanical and electromechanical components</li>
<li>Manual dexterity</li>
<li>Ability to work in a team setting</li>
<li>A positive can-do attitude</li>
<li>Strong motivation and communication skills</li>
<li>Problem solving skills</li>
<li>Other duties as assigned</li>
</ul>
Lou-Rich Training Requirements:
<ul>
<li>Applicable training will be completed by following the syllabi (Human Resources, Safety, IFS – Time clock, IFS - Navigation, ISO, Inspection Hand Tools, Inspection Forms, CMM, and Technical) for each new hire and that will be verified by the Employee Orientation &amp; Job Qualification form within the first 60 days of employment. Additional applicable training will be completed by following the individual’s assigned department training matrix, Paint Line (F4400-355).</li>
<li>Follow training syllabus (Technical from above list). Effectiveness of training guidelines will be determined by employee knowledge and demonstration of learned concepts. Additional training after the first several weeks of on-the-job training will be determined by the Supervisor in preparation to operate on their own as needed. Any follow-up training will be evaluated and provided at the 60-day review or as deemed necessary for the position.</li>
</ul>
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers and talk and hear.
Work Environment:
The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Americans with Disabilities Act:
If you are a qualified individual with a disability, you have a right to request that the Authority make reasonable accommodations in order to help you accomplish your work, which must still be performed in all essential functions.
 
PI4add2c38acc9-25405-39262947

2nd shift Assembler - Scotsman

<h3>Job Description</h3>
Who We Are
As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.
The Senior Electrical Staff Engineer position is based out of our Byron Clean Energy facility in Byron, IL. 
Total Rewards
Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.
Expected salary range of $144,900 to $161,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).
Primary Purpose of Position
Performs advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.
 
Primary Duties and Accountabilities
<ul>
<li>Perform advanced engineering and technical tasks in support of nuclear plant operations. </li>
<li>Perform independent research, reviews, studies and analyses in support of technical projects.</li>
<li>Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.</li>
<li>Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.</li>
<li>Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.</li>
<li>Provides initial or complete task management of engineering issues.</li>
<li>Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.</li>
<li>Supports plant design modifications, testing and problem solving.</li>
<li>Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.</li>
<li>Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.</li>
<li>Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.</li>
</ul>
 
Minimum Qualifications
<ul>
<li>Bachelor's degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 10 years of engineering experience </li>
<li>Demonstrated technical leadership experience (e.g. Duty team lead, inspection lead), teamwork and leadership attributes </li>
<li>Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties </li>
</ul>
Preferred Qualifications
Professional Engineer (PE) License

Senior Electrical Staff Engineer

<h3>Job Description</h3>
Who We Are
As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.
The Structural / Mechanical Engineer position is based out of our Byron Clean Energy facility in Byron, IL.
Total Rewards
Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.
*****************This Engineering role can be filled at Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************&nbsp;
Mid Level - $90,000-$110,000&nbsp;
Sr Level - $117,000-$143,000&nbsp;
Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K&nbsp;
Primary Purpose of Position
Responsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.
Primary Duties and Accountabilities
<ul>
<li>Perform engineering and technical tasks as assigned by supervision applying general engineering principles.</li>
<li>Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.</li>
<li>Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.</li>
<li>Recommend format and methodology improvements to standard processes and procedures.</li>
<li>All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (Emergency Response duties and/or coverage, Department duty coverage and/or call out, and positions outside of department in support of outage activities etc.)</li>
</ul>
MINIMUM QUALIFICATIONS for Mid-level E02 Engineer
<ul>
<li>B.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experience</li>
<li>Must meet additional requirements as outlined in ANSI/ANS-3.1-2014 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"</li>
<li>Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties</li>
</ul>
MINIMUM QUALIFICATIONS for Senior E03 Engineer
<ul>
<li>B.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience</li>
<li>Must meet additional requirements as outlined in ANSI/ANS-3.1-2014 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"</li>
<li>Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties</li>
</ul>
Preferred Qualifications
<ul>
<li>Engineer in training certification</li>
<li>Good grasp of techniques and a good understanding of the fundamental functions performed by the group</li>
</ul>

221,019 Manufacturing Jobs