field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionDescription:
Summary Job Description: Responsible for final finishes running machine. This involves tasks related to set-up, machine operation, and disposing of chips as required.
 
 
Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.
 
 
Tools and Equipment: Roll grinder, various hand tools, chip pushers, cranes, shovels, brooms, etc. This list is not all inclusive.
 
 
Job Functions and Functional Job Task Elements
 
 
Task 1: Operate Machine
 
<ul>
<li>Receive metal rolls from machine area-a jib crane can be used to lift heavier items.</li>
<li>Check prints for specific job.</li>
<li>Parts placed and measurements taken and tool marked prior to running job.</li>
<li>Need a forward reach of 32”.</li>
<li>Gripping of parts and tools.</li>
<li>May need to utilize drivers to operate the machine-can weigh up to 90#.</li>
<li>Change out bearings as needed.</li>
<li>Must monitor machine operation carefully due to close tolerance of machine operation-final finishes on neck and barrel.</li>
<li>Trunk flexion and twisting.</li>
<li>May utilize stool for sitting if needed to observe and monitor machine while running.</li>
<li>Walk back and forth to monitor machine.</li>
<li>Visual inspection of part.</li>
</ul>
 
 
Task 2: Maintain Machine and Surrounding Area
 
<ul>
<li>The chips on this machine need be shoveled into pit.</li>
<li>Oil/water mix with -soda ash.</li>
<li>Check machine for maintenance: check fluids, etc.</li>
<li>Complete time sheet per job: materials and time noted.</li>
<li>Keep area clean, sweep, pick up debris, etc.</li>
</ul>
 
 
 
Job Analysis Summary Sheet
 
United Rolls Inc.
 
Job Title: Roll Grinder
 
 
Essential Job Functions, Frequency/Duration Operate Machine Maintain Machine/ Area
 
Material Handling
 
Floor to Waist 10-90# Up to 30#
 
Waist to Shoulder
 
Shoulder to Overhead
 
Pushing/Pulling At least 50# of force At least 25# of force
 
Carry 10-90# 30#
 
Positional Tasks
 
Standing/Walking F O
 
Sitting O O
 
Neck
 
Bending/Flexion O-F O
 
Extending “ “
 
Twisting “ “
 
Side Bending “ “
 
Back
 
Bending/Flexion O O
 
Extending “ “
 
Twisting “ “
 
Side Bending “ “
 
Upper Extremity
 
Right Hand Gripping Mx Mx
 
Left Hand Gripping Mx Mx
 
Fine Manipulation O-F O
 
Repetitive Motion O O
 
Reaching O O
 
Overhead Activity
 
Lower Extremity
 
Walking O O
 
Squatting I-O I
 
Kneeling
 
Climbing O O
 
Balancing “ “
 
N: Negligible R: Rare I: Infrequent O: Occasional F: Frequent C: Constant
 
Less than 1% 1% or less of task 2-5% of task 6-33% of task 34-66% of task 67-100% of task
 
1 or less reps/hour 1-2 reps/hour 3-12 reps/hour 13-30 reps/hour 31-60 reps/hour
 
1 or less reps/day 2-20 reps/day 21-100 reps/day 101-245 reps/day 246-490 reps/day
 
Mn: (Minimal) Below 30% of Maximum Force Mx: (Maximal) Exceeding 30% of Maximum Force
Requirements:

Roll Grinder

<h3>Job Description</h3>
Job DescriptionDescription:
Adventure Tours is excited to share that our Philadelphia, PA location currently has vacancies for Line Run Bus Operators. We are seeking professional, safety-focused Motor Coach Operators for FLIX line runs departing from Philadelphia to New York and Boston.
About Us:
Adventure Tours has been in business for over 25 years, we are a leading provider of luxury motor coach transportation services with headquarters in Accokeek, MD. We have expanded our locations to include Charlotte, NC, Philadelphia, PA, Long Island, NY, and a new location in Richmond, VA. As a Line Run Operator at Adventure Tours, you have the potential to earn gratuities, enhancing your overall compensation.
 
Compensation
<ul>
<li>Philadelphia to New York: $325/day</li>
<li>Philadelphia to Boston: $325/day</li>
</ul>
Responsibilities
<ul>
<li>Safely operate motor coaches on scheduled routes, ensuring on-time performance.</li>
<li>Provide exceptional customer service to passengers.</li>
<li>Conduct pre-trip and post-trip vehicle inspections.</li>
<li>Adhere to all traffic laws and company policies.</li>
<li>Maintain accurate records of trips, mileage, and hours.</li>
</ul>
Requirements
<ul>
<li>Valid Commercial Driver’s License (CDL) with Passenger and Air Brake endorsements.</li>
<li>Minimum of 2 years of experience in commercial driving, preferably with motor coaches.</li>
<li>Clean driving record.</li>
<li>Strong communication and customer service skills.</li>
<li>Ability to work flexible hours, including weekends and holidays.</li>
</ul>
Valuable Rewards for Full-Time Employees:
<ul>
<li>Comprehensive Health, Dental, and Vision Insurance</li>
<li>401(k) Retirement Plan</li>
<li>401(k) Match</li>
<li>Paid Time Off and Holidays</li>
<li>Career Advancement Opportunities</li>
<li>Professional Training and Development Opportunities</li>
</ul>
Equal Employment Opportunity:
Adventure Tours is an Equal Opportunity Employer. We make employment decisions without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic information, protected veteran status, or any other characteristics protected by law.
 
If you are ready to take your career to the next level and be part of a team that sets the standard for luxury transportation, we want to hear from you. Apply now and drive towards a brighter future with Adventure Tours!
Requirements:

Line Run Bus Operator - Up To $325/Day

<h3>Job Description</h3>
Job DescriptionMACHINE OPERATORMonday – Friday, occasional Saturdays7:00 am – 3:30 pm, overtime is mandatory$15.00 per hour or DOE ESSENTIAL JOB FUNCTIONS 
<ul>
<li>Assembling the equipment utilized in the packaging room.</li>
<li>Perform minor routine maintenance of the equipment.</li>
<li>Operate the Cryovac packaging machine and troubleshoot minor problems.</li>
<li>Maintain the cleanliness of the Packaging Room.</li>
<li>Clean equipment as required between products.</li>
<li>Work safely while lifting and operating equipment.</li>
<li>Perform duties while understanding and observing company policies on food safety, product quality and Good Manufacturing Practices.</li>
<li>Other job duties as assigned.</li>
</ul>
JOB REQUIREMENTS 
<ul>
<li>Requires a High School Diploma or equivalent</li>
<li>The individual must have the ability to perform basic reading and math computations</li>
<li>Have some problem-solving ability</li>
<li>Be attentive to detail</li>
<li>Able to work on their feet all day.</li>
<li>Able to lift 50 pounds periodically</li>
<li>Must be able to work well with others as a team member</li>
<li>Ability to work in a production environment that can be slippery and wet with temperature ranges from 60 degrees to 90 degrees and humid</li>
<li>One year of experience in food manufacturing and/or machine operation</li>
<li>Overtime hours may be required during periods of high workload</li>
</ul>

MACHINE OPERATOR

<h3>Job Description</h3>
Job DescriptionDescription:
Summary: Quality Control Scientist is responsible for leading multiple projects in a GMP/GLP environment involving analytical test methods in a cross-functional setting. QC Scientist will serve as Subject Matter Expert (SME) in method development, optimization, validation, and troubleshooting instruments (HPLC, GC, UV Spectroscopy, TOC, etc.) / test methods. QC Scientist will partner with contracted labs to oversee the development and validation of analytical methods. QC Scientist will work with the Validation team to coordinate testing related to validation tasks and support the QC Manager in various tasks to support business needs. 
 
Essential Duties and Responsibilities
<ul>
<li>Oversee test method validation execution</li>
<li>Develop analytical test methods</li>
<li>Author and maintain test method procedures and forms in the current state</li>
<li>Author analytical test method validation protocols and reports</li>
<li>Qualify test method for formulation grouping</li>
<li>Troubleshoot technical issues with methods and instrument operation</li>
<li>Serve as SME on analytical test methods and instrument operation</li>
<li>Lead method technology transfer activities with contracted labs</li>
<li>Process and interpret chromatographic data independently, and communicate the significance of the validation results to management</li>
<li>Review analytical data for accuracy and release/reject results</li>
<li>Perform analytical testing for validation support </li>
<li>Develop/reverse engineer formulations to support new product strategy</li>
<li>Develop raw material, in-process, bulk, and finished good specifications for new products</li>
<li>Support the development of new product scale-up activities (order of ingredient addition, mixing speeds, mixing time, temperature, etc.)</li>
<li>Troubleshoot formulation-related issues</li>
<li>Coordinate with team members to ensure seamless analytical testing coverage for manufacturing operations and validation activities</li>
<li>Train QC personnel on analytical testing and equipment operations</li>
<li>Lead qualification activities with QC instruments</li>
<li>Provide project progress updates and communicate cross-functional dependencies to achieve results.</li>
<li>Keep current on new technologies and literature related to analytical test methods</li>
<li>Maintain documentation, equipment, and work area in orderly condition at all times.</li>
<li>May be required to perform other QC duties as assigned by management</li>
</ul>
 
Supervisory Responsibilities: This position has no supervisory responsibilities.
Department: Quality Control 
Reports To: Director of Quality
 
 
Requirements:
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
 
Education and/or Experience
<ul>
<li>Minimum of a bachelor’s degree in chemistry or related scientific field. A master’s degree is preferred.</li>
<li>7+ years of laboratory experience in a regulated industry (pharmaceutical, dietary supplement, biotech, etc.) with 5+ years of experience in method development and validation.</li>
<li>Knowledge, Skills, and Abilities</li>
<li>Excellent organizational skills in management of data, reagents, and equipment</li>
<li>Expertise in performing analytical methods, maintaining, and troubleshooting (HPLC, FTIR, GC, UV Spectroscopy, etc.)</li>
<li>Working knowledge/experience with chromatographic data acquisition systems</li>
<li>Working knowledge/experience of data integrity and GMP/GLP requirements</li>
<li>Working knowledge/experience of USP/AOAC.</li>
<li>Experience working in a regulated (i.e., FDA, NPA, etc.) GMP environment is required.</li>
<li>Experience in maintaining data integrity is required.</li>
<li>Hands-on experience with chromatography equipment is required.</li>
<li>Experience with EP, BP, ACS, and ICH guidelines is preferred.</li>
<li>Experience reviewing audit trails</li>
<li>Experience with Agilent GC, Waters HPLC equipment, Empower 3 Chromatography Software, and TOC is preferred.</li>
<li>Experience with preventive maintenance and calibration of instruments is preferred.</li>
<li>Ability to work under pressure and with a sense of urgency to deliver results on schedule with minimal supervision.</li>
<li>Able and willing to work in a team environment and participate in cross-functional team activities.</li>
<li>Ability to write routine reports and correspondence.</li>
<li>Ability to train others.</li>
<li>Discipline to consistently follow SOPs, GMPs, and safety precautions.</li>
<li>Strong analytical reasoning skills &amp; excellent written and verbal communication skills.</li>
<li>Knowledgeable in Microsoft Office, Outlook, and similar programs.</li>
</ul>
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms. The employee is frequently required to stand, walk, and talk or hear. The employee must regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds. 
 
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.
This job description is subject to change at any time.

QC Scientist

<h3>Job Description</h3>
Job Description
Adecco is hiring immediately for this Production job with a local client in Marietta, OH. Weekly pay starting at $15.00 per hour and competitive benefits with options such as medical, dental, vision, and 401(k). We have openings on the first shift: Monday-Friday 6:00 am-2:30 pm. After you apply, you will have a chance to schedule an immediate interview!  
As an Assembler, you will complete assembly processes to finish units in a specified sequence and ensure that completed units meet specified quality standards before moving the unit to the next workstation. These Production Assembler jobs require 1-2 years of manufacturing experience and a High School Diploma or GED equivalent. Candidates should also be able to read, interpret, and follow wiring diagrams and blueprints as shown in SOE, and read and differentiate part numbers, labels, and work instructions. 
Click on Apply Now to be considered for this Production job in Marietta, OH. 
 Pay Details: $15.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to <a href="https://www.adecco.com/en-us/candidate-privacy" target="_blank">https://www.adecco.com/en-us/candidate-privacy</a> The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: 
<ul>
<li>The California Fair Chance Act</li>
<li>Los Angeles City Fair Chance Ordinance</li>
<li>Los Angeles County Fair Chance Ordinance for Employers</li>
<li>San Francisco Fair Chance Ordinance</li>
</ul>

Production Assembler

<h3>Job Description</h3>
Job DescriptionDescription:
ECS is seeking an experienced and skilled HVAC Sheetmetal Journeyman to join our team. Responsible for fabricating, installing, and maintaining sheet metal components for HVAC systems. This includes reading blueprints, cutting and shaping sheet metal, installing ductwork, and ensuring proper system operation. The position requires advanced knowledge of HVAC systems and sheet metal work, with a focus on quality and safety.
 
Key Responsibilities:
<ul>
<li>• Fabricate, install, and maintain sheet metal ductwork and HVAC components.</li>
<li>• Read and interpret blueprints, drawings, and technical specifications.</li>
<li>• Perform system installations, inspections, and repairs.</li>
<li>• Ensure compliance with safety standards and building codes.</li>
<li>• Troubleshoot and resolve system issues.</li>
<li>• Collaborate with team members and contractors to complete projects.</li>
</ul>
Benefits:
<ul>
<li>• Health, dental, and vision insurance</li>
<li>• Life insurance &amp; long-term disability</li>
<li>• 401K with company match</li>
<li>• Paid sick leave, vacation, and holidays (8)</li>
<li>• Professional training &amp; industry certification</li>
<li>• Referral incentives &amp; continuing education reimbursement</li>
<li>• Safety Boot Program - $150 reimbursement for the purchase of safety boots, yearly.</li>
</ul>
Requirements:
<ul>
<li>• 5+ years of HVAC sheet metal experience.</li>
<li>• Journeyman certification in HVAC or sheet metal work.</li>
<li>• Strong knowledge of HVAC systems, ductwork, and airflow principles.</li>
<li>• Proficiency in using sheet metal tools and equipment.</li>
<li>• Ability to work in various environments, including high spaces.</li>
<li>• Good physical stamina and problem-solving skills.</li>
<li>• Ability to work well with others and communicate effectively.</li>
<li>• Experience with rigging and hoisting equipment for heavy components.</li>
<li>• Ability to work overtime, weekends, and travel as needed.</li>
<li>• OSHA 10 or the ability to obtain within 90 days.</li>
<li>• Valid driver’s license and insurable driving record.</li>
</ul>

HVAC Sheetmetal Journeyman

<h3>Job Description</h3>
Job DescriptionDescription:
BR Printers is built on a foundation of creativity, innovation, teamwork, and an entrepreneurial spirit. We are energetic and passionate, bringing our A-game to every task and interaction we come up against. We specialize in textbooks and educational materials; our team is driven by a passion for creating cutting-edge solutions that deliver exceptional value to our customers. With a culture built on respect, creativity, and teamwork, we encourage every individual to bring their unique perspective and skills to the table. As a forward-thinking company, we provide opportunities for growth and development, ensuring that our employees thrive both personally and professionally.
 
We are looking for an Offset Sheetfed Operator with 2-3 years related experience in Offset Printing to join our growing team! 
 
**Hours for this position are 5:30am - 1:30pm. 
 
Key Responsibilities
<ul>
<li>Load paper, install plates, monitor ink and water</li>
<li>Identify potential technical issues on designated machines</li>
<li>Work efficiently to help meet production goals and timelines</li>
</ul>
Requirements:
<ul>
<li>High school degree or equivalent (Preferred)</li>
<li>2-3 yrs experience in Offset Printing</li>
<li>Experience on a 40” sheetfed press preferred</li>
<li>Minimum one year experience with printers and binders preferred</li>
<li>Experience in Manufacturing preferred</li>
<li>Attention to detail</li>
<li>Problem-solving skills</li>
<li>Ability to lift and move products for an entire 8-hour shift</li>
<li>Ability to work and thrive in a fast past environment</li>
</ul>
BR Printers offers a robust benefits package including competitive compensation, 401k match, health benefits, paid time off, and internal growth opportunities.

Offset Sheetfed Operator

<h3>Job Description</h3>
Job DescriptionRegal Staffing Services now hiring a Machine/ Process Operator Position located in the Midlothian, 76065 area.If you would like to apply or have any questions, please call (469) 310-5850 and ask for either Juana or Esperanza. Shift/Pay Rate:1st shift Monday- Friday with some Saturday’ s (5am to 3:30pm): $18.50/hour2nd shift Monday- Friday with some Saturday’s (2pm-12:30am): $19.00/hour Responsibilities:Include the following. Other duties may be assigned.
<ul>
<li>Pushes buttons, etc. to activate machine.</li>
<li>Sets production speed on the amount that is filled.</li>
<li>Reads job specifications to determine machine adjustments and material requirements.</li>
<li>Observes machine operation to detect work piece defects or machine malfunction.</li>
<li>Performs minor machine maintenance such as oiling machines, troubleshooting, assembling machine, disassembling machine for cleaning and sanitization.</li>
<li>Able cleans the Machine</li>
<li>Keeps a clean workstation and safe environment for the production line</li>
</ul>
Requirements:
<ul>
<li>Must have machine operation experience preferable in the food manufacturing industry</li>
<li>Must be able to stand up to 10 hours during shift</li>
<li>Must be able to lift up to 50lbs</li>
<li>Must adhere to the safety protocols</li>
<li>Must have solid stable work history</li>
<li>Pass background and drug screen</li>
</ul>
How to Apply:
<ul>
<li>Fill out our official application online at <a href="http://www.applyregal.com" target="_blank">www.applyregal.com</a> (be sure to select "Dallas” as your branch).</li>
<li>If you have any questions, please contact us at (469) 310-5850.</li>
</ul>

EFC- Process Operator

<h3>Job Description</h3>
Job Description
Dental Hygienist Assistant - Experience preferred but willing to train the right person. Salary DOE. Job includes chairside assisting during hygiene treatment, suctioning, polishing, taking x-rays and charting. Helps the hygienist to prepare operatories ie., set up and breakdown, maintain a clean and sterile environment, sterilization, patient education on oral hygiene care and assists the front office with scheduling patient appointments.
This position is full time Tuesday through Saturday.
Company DescriptionThis is a general family dental practice. We are dedicated to providing a clean, welcoming office while providing exceptional patient care and building strong lasting relationships. 
<h3>Company Description</h3>
This is a general family dental practice. We are dedicated to providing a clean, welcoming office while providing exceptional patient care and building strong lasting relationships.

Hygiene Assistant

<h3>Job Description</h3>
Job DescriptionTemp to Hire Production Worker for Pet Food Manufacturer in Binghamton, NY. Pay: $17.00/hr.Hours: M-F 7:00a.m. - 2:00p.m.PPE: coveralls, boots (if employee doesn't have steel toed boots), gloves &amp; hearing protection are provided &amp; required to be worn on the production floor.Requirements: Must provide proof of covid19 vaccination Must be able to lift 50-75 lbs., work in cold temperatures (freezer area) Will be working in pet food ingredient processing plant.Will be handling cow bones, cow (raw) meat.Candidate must be a team player and reliable. Employee will perform various duties at different stations on the production floor stacking product and general clean-up throughout the daily shift is required.Candidates must have their own vehicle.Candidates must be comfortable working in cold temperatures. Paid holidays, paid vacation &amp; medical insurance are offered once hired perm.

54,126 Manufacturing Jobs